VEVOR Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine

I read the reviews on this and kinda excited the worst, I could see it was completely fixable. Got mine took it all apart and really nothing was wrong I polished it up a bit put a shim on 1 of the bearings and adjusted everything as tightly as possible set it up. Works really well only tried couple small things. I do wish it was a little bigger.

It’s working smoothl and the price is right Good quality above average didn’t need more than that

Handles could be better. Over all, works well for price. Good for the DIYers and home garage user. Not for the professional.

Pretty sloppy but for the price it is a great addition to a drill press especially if you have a 4" machine vice to go with it...................................................................................................................................................................................................................................................................................Vevor wanted 100 more characters. I didn't have anything else to say. If you need more help with this tool there are many videos on youtube.

If you expect it to be a precision tool out of the box, you will be very disappointed. The price of one being accurate upon delivery starts at around $1,800. Before I purchased it I did some research and found a machinist on YouTube who disassembled the same model and showed how to sand the rough edges and adjust it for accuracy. I agreed with him that for the price it was worth a try. When I got it out of the box, all the edges were razor sharp, the slides were loose in some places and bound up in other places. After taking it completely apart, cleaning all parts, using high speed grinder sanding discs on the edges and slide surfaces, realigning the slide bolt, lubricating, and then reassembling, I am very pleased with the product. Because I knew what I would be getting, knew I would have to invest several hours of work into it, and knew how much money I was saving, I would say it’s a very good product. But if you want a polished, accurate one out of the box, skip this one. Take out a second mortgage on your house and buy one elsewhere.

The castings and machining are good but the lead screws and mechanism need some attention. If you replace the lead screw and perhaps add some DROs the table will work very well. In my opinion this table is a VERY GOOD value. Aside from the lead screw, this table is a good as tables that cost 4 to 5 times more.

This is not what I would consider a milling table but is fine for use on my drill press. I have a mini mill for milling operations and am upgrading to a larger mill soon, but for less precise work this does a good job. For making a series of holes in a relatively straight line, this will do the trick.

For the price, this is fantastic milling table. It’s nice and tight with no perceptible slop at the mating surfaces, and an acceptable amount of take up at the hand wheels. it is very well-made, heavy, and is now my permanent table for my homemade 1945 Atlas model 73 based mill.

got it to set up for feed for knife grinder. Use it to control advance feed for slide. accurate enough for me to control amount of bevel grind down to a few .001